Did another one tonight out of walnut.
Is the amount left for the base on this one better? I do like to have a little room to work in for the final parting off. There is an inch and a half of tenon and waste, plus half an inch of thickness for the bottom of the form, so altogether two inches of wood. Will this cause problems? I could use a reverse jamb chuck and turn off the tenon and some of the waste to make a new tenon, which would lose about half of the current extra thickness down there.
Dan
Eternity is an awfully long time, especially toward the end.
-Woody Allen-
Critiques on works posted are always welcome