What would you do? 1 Bandsaw or 2.

[Neil Bosdet]

I have the envious situation of setting up a new shop with new tools. I moved last week (not enviable, totally gross) but sold my machinery for a decent price to allow me to purchase new and not have move, store and move my ugly heavy machinery while I'm building my new shop.

I'm going to place my Grizzly order today and am on the fence whether to buy the 24" G0568 Bandsaw for all uses (resawing and scrolly work) or spend a little more ($1000) and get the 17" G0636X for dedicated resawing and the 19" G0514X2B for scrolly work. I need at least an 18" throat for the scrolly work. I find I go back and forth with resawing and scrolly work and constantly changing the set up is annoying and time consuming. On the other hand the size of the 24" would be very nice. It looks like it's a beast.

Hmmm, decisions, decisions. What would you do given my brief description.

[Harold Burrell]

Wow...what a great problem to have, huh?

I'm not sure what I would do, frankly. I do have 2 bandsaws, but nothing as elaborate as what you're looking at. I have the G0513X2 (which I LOVE) that I keep a 3/4" blade on. And then I have an older 14" that I use for tighter curves, etc.

I picked up the 14" used for $150.

By looking at your post again, I guess my first question would be "How do you know you need at least 18" throat for scroll work?" Can't you flip the piece over as needed?

My second thought is this: If you know you need at least 18", why not go for the G0568? I've never heard anyone complain before that their saw was too big (Well...until they try to move it.). And then (since you have another $1000 to spend) look for a used BS somewhere...and "make do" in the meantime.

[Matt Day]

Why not get a scroll saw for the scroll work instead of a giant and expensive BS?

[Rick Potter]

If you have room in the new shop, and the 17" will meet your resaw needs, it's a no brainer. No one likes to change blades often. Get both saws.

On the other hand, if you NEED the capacity of the 24" resaw, get it and change blades till you can afford the second saw. You do know you really want two saws, right??

Congrats on the new shop,
Rick Potter

PS: I assume you are scrolling some pretty large stuff, like architectural work?

[Myk Rian]

Might want to find out what is in stock. There have been times machines have been waiting for the boat.

[Jeff Duncan]

What would I do......well I'd go out and buy a 30"-36" Yates, Oliver, or Tanny and have a saw that will handle everything you ever throw at it. I love my old ugly machines and there's nothing in the Grizzly catalog that comes close

good luck,
JeffD

[Neil Bosdet]

Thanks for your replies. One of my main pieces requires the 18" throat. I had a Laguna LT18 (sold it now) and I utilized all of the throat. Going smaller won't work. I used the term "scrolly work" loosely. It's 1/4" blade curvy stuff. A scroll saw won't do for my needs. I was planning to go with the 24" alone but 2 would be so nice. Set them up and leave them. When you need to resaw, there you go. Quick curvy cut, no problem. The 24" seems like such overkill for my curvy work. The ultimate 17" seems like it will handle all my resaw needs. I don't need a huge throat for that, just decent height. My Laguna had 12" resaw height which limited me. I could have used more. 16" sounds like it should do the trick and at a reasonable price.

I have to decide today. I've got a Grizzly coupon and it expires today. 10% off on my order will add up to a lot. Big order.

[David Kumm]

I'd get a good 18-20" for the scroll work and wait until a nice used 24" or larger shows up for resawing. I run a Yates Y20 for small and Oliver 30 and 36 for the large stuff. Dave

[Glen Blanchard]

No question! 2 bandsaws. That's what I have and I wouldn't want to do that blade change thing very often.

[Art Mann]

I hate changing blades and setting up the guides so much that I want another band saw even if it is identical to the one I already have.

[ryan meacham]

I use 2 saws. One for re saw and the other for curves like you mentioned. I also use the smaller saw on mdf flake board and other damaging sheet good. Smaller blades are less expensive than the large

[Gus Dundon]

Buy the two band saws for easier life.

[Mike Wilkins]

After you go through a couple of blade changes from a resaw blade to a 1/4" blade for the scrolly stuff and back again, you will welcome a 2nd machine. I currently have a Laguna LT18 with the 12" resaw height. The newer ones come with 18" resaw capacity-nice. Then get yourself a 14" machine and keep a 1/4" blade on it all the time for the intricate stuff. Grizzly has a good 14" machine that most of the magazines seem to like. Or get one of the benchtop machines such as the Rikon benchtop for the smaller stuff. Even with my smallish shop (16 X 24), 2 bandsaws make sense.

[Neil Bosdet]

I need a larger saw for my curvy/small blade machine. I need a min 18" throat. That's been the issue. Buy a larger machine for the curvy work but get a machine capable of resawing. That was why I was hesitating. I pulled the trigger yesterday and bought the 2 machines I listed above. I'm at ease with the decision which means I've made the right choice.

[Denny Rice]

Changing bandsaw blades is a pain in the butt! If I had the ability and the space for two bandsaws that is what I would do too, have one set up for resawing and the other set up for your lighter work.