What size vix bit is needed to mount the cup side of the hinge to the door?
What size vix bit is needed to mount the cup side of the hinge to the door?
Vix bit? Do you mean forstner? If so, a 1 3/8" forstner will drill the cup hole.
Bill
On the other hand, I still have five fingers.
I use 3/32.
Thanks. That's what I was looking for.
If your talking about the screws then it depends on the material. For solid wood you can go with the #6 or #7 screws which hold OK. But for mdf, particle board, or a better grip in solid, I'd go with the Insertas....you'll need a 5mm vix bit for those.
good luck,
JeffD
Thanks for the responses