[OP]
Member
I recently became a member of the AAW Woodturning FUNdamentals committee.
This video accompanies a short article I wrote for the May/June newsletter.
It's a simple enough accessory to build. I was having fun playing with some new audio recording equipment and video post production software.
http://vimeo.com/65065573
Lathes: Nova DVR XP, Delta 46-460, Jet 1014vsi; Bader III 2"x72" belt grinder; Triton 2.25 router; CMT Industrio table; Jointech fence; SC planer; Dewalt miter; Delta 14" bandsaw; Festool TS55, MFT/3, CT22, ETS150/3, OF1400, PSB300EQ, CXS; Hegner Scrollsaw; JJ-6CS jointer; Grizzly 1023s cabinetsaw, Jet 17" drill press; Rigid OSS; 9" SandFlee; 3M AirStream & Breathe Easy PAPRs
Member
Great idea! You can even keep several around with different size/purposed sand papers. One for the 2 or 3 inch sanding a the lathe. Square sheets for a palm sander, 5 inch orbital sander... endless possibilities to be able to keep track of where you are at in the cycle of grits.
Have a Nice Day!
[OP]
Member
Jon,
Absolutely, it takes only about 3 more minutes to make two instead of one... make them by the dozen <vbg>
Lathes: Nova DVR XP, Delta 46-460, Jet 1014vsi; Bader III 2"x72" belt grinder; Triton 2.25 router; CMT Industrio table; Jointech fence; SC planer; Dewalt miter; Delta 14" bandsaw; Festool TS55, MFT/3, CT22, ETS150/3, OF1400, PSB300EQ, CXS; Hegner Scrollsaw; JJ-6CS jointer; Grizzly 1023s cabinetsaw, Jet 17" drill press; Rigid OSS; 9" SandFlee; 3M AirStream & Breathe Easy PAPRs
Posting Permissions
Reply With Quote