Blade guide problem

[mike rawl]

I looked at the blade guide assembly and that looks like it may be part of the problem. I will look at it a little more carefully and shim it at the riser block. Once that it done I will see what else I need to do.

Lee I looked at the bottom guide assembly and the bottom trust bearing is not a problem. I do not know why, but the bottom trust bearing was nowhere near the blade so it wasn't pushing the blade forward.

Thanks for your help guys. I think that this will get me moving in the direction needed to correct the problem.

[mike rawl]

I checked out the Alex Snodgrass video and I think that will help me out a lot too.