How many routers do you own?

[John Piwaron]

If I catch them, noone will ever know.

Sounds like a job for a 5hp Hobart food waste disposer.

People that break into homes and businesses have about the most dangerous occupation possible. They don't tell anyone where they're going. They are were they shouldn't be. If something happens to them, no one that looks for them will be able to find them if they go missing.

[Leo Graywacz]

It was only a matter of time......

Good one.

Me, I've concluded I'm under routered, and I'm embarking on a mission to correct that.

This will be a multi year endeavor. But I will eventually achieve routerness.

Is there public funding for this?

Well you know what they say. "There's a wiseguy in every group"

And guess what?

THAT'S ME !!

[Rick Potter]

Ahhh, there is a very slight possibility I may have undercounted, but I will never tell.

The fantum.

[Jerry Olexa]

Six..I've sold a few over the years...Need all 6 remaining!!

[J D Thomas]

Eight total, including the PC 7518 in my table. I have to keep restraining myself whenever a good deal pops up on craigslist. Is 8 really enough?? (Hmm, sounds like a TV show)

[Fred Voorhees]

I have three or four.

[Kelly Colin Mark]

2 x PC 7519, but one is not working right now (does that count?), one in Jessem table
1 PC 690 router - mounted in Incra table
1 Freud FT2000VCE (IIRC), came with a second Incra top that I haven't actually setup yet.
Festool OF2200, OF1400, and OF1000

[Joe Shinall]

Sounds like a job for a 5hp Hobart food waste disposer.

People that break into homes and businesses have about the most dangerous occupation possible. They don't tell anyone where they're going. They are were they shouldn't be. If something happens to them, no one that looks for them will be able to find them if they go missing.

I know some people that know some people...

[Joe Shinall]

So the longer this thread gets, the more I see I am under powered in the router department. I'm going to be watching craigslist like a hawk. Not just for my stuff, but for some nice routers too!

[johnny means]

These, plus a new Bosch. I like routers a lot.

[Chris Friesen]

I've got two Bosch 1617EVSPK, one of them with the fence. Normally one lives in the router table and the other does handheld stuff.

[Erik Christensen]

I am feeling like such a luzor - I only have 3 - DW618 for the Leigh jig and Festool 1010 & 2200 for everything else (no router table as I have a shaper)

I must have more!!!!!!!!!!!!!!!

[David Weaver]

Four. And I am a hand tool woodworker and rarely use them.

[Gordon Eyre]

I have two, one in my router table and one smaller one for hand routing. Both accomodate a 1/2 inch router bit.

[Art Mann]

Two in router tables, one for hand and plunge routing and a trim router. Looking to buy a bench top CNC router. Anybody got a good one for sale?