Blade for Stanley Router handplane No 71 1/2

[Jessica Pierce-LaRose]

My first thought would be to replace the stud the adjuster threads onto with one that was longer, but it's probably some odd, hard to source thread pitch similar to other stanley parts, isn't it? Either way, flipping the nut is easier, and it really only impacts you at the shallowest depths.

[Sam Takeuchi]

I have a Record No.71 (exact Stanley copy down to thread size) and I use Veritas router plane blades. Only thing that needed to be done as to flip the depth adjuster wheel upside down. So if you just need blades, get it there. No need to complicate things.

[Don Morris]

Blades are ordered. Thanks again people!