[OP]
Contributor
Sadly, I have not had much time at the lathe in awhile. So this morning I decided it was time to finish up a roughed out blank of Spalted Maple. Dimensions are 5 1/2" x 13"x 3/16" thick. I added a few embellishments. Finished with Minwax Poly Wipe, buffed and Ren-waxed.
C&C welcome.
055.jpg054.jpg053.jpg
Contributor
Nice work. Some spalted and a little segmented - nice mix.
Thank you,
Rich Aldrich
65 miles SE of Steve Schlumpf.
"To a pessimist, the glass is half empty; to an optimist, the glass is half full; to an engineer, the glass is twice as big as it needs to be." Unknown author
Member
Beautiful Mike, Love the accent ring and collar
When you approach the lathe you have "the plan", after your first catch you have "the intent".- P. Harbeck
Contributor
Very nice vase. Love the embellishments!
Contributor
Beautiful piece Mike and a nice mix.
Bernie
Never put off until tomorrow what you can do the day after tomorrow.
To succeed in life, you need three things: a wishbone, a backbone and a funnybone.
Posting Permissions
Reply With Quote