Half Inch Acrylic

[Steve McKee]

I have a customer that wants some pieces cut from 1/2 inch clear acrylic which I thought I would be able to get from one of my usual suppliers however I just checked their websites and no one seems to carry 1/2 inch. Anyone know of a supplier that does carry this thick of material? I only need 1 sheet of 12 x 24.

Thanks,
Steve

[Gary Hair]

http://www.delviesplastics.com/mm5/m...=Clear_Acrylic

[Ross Moshinsky]

Delvies. I'd also call around a couple of local acrylic/plastic fabricators. Often they have scrap pieces laying around they are willing to sell off. That's what we do quite often.

[George M. Perzel]

Try McMasters-Carr
They have clear acrylic up to 4" thick
Best Regards,
George
Laserarts

[Keith Outten]

Steve,

If you enter SawMill on checkout you will receive a 10% discount at Delvies Plastics, they are an Advertiser/Sponsor here at The Creek.

http://www.sawmillcreek.org/advertisers.php

[Steve McKee]

I had looked at Delvies and apparently had not had enough coffee yet, totally overlooked the 1/2 inch.

Thanks for the info Keith. I do order from them from time to time and was not aware of that.

Steve

[Robert Silvers]

Steve,

If you enter SawMill on checkout you will receive a 10% discount at Delvies Plastics, they are an Advertiser/Sponsor here at The Creek.

http://www.sawmillcreek.org/advertisers.php

That has expired. Is there a new code? Thank you.

[Keith Outten]

Robert,

I will check on the code.
.

[Greg W Watson]

Any word on new code?