-
Charles,
Here are a couple of photos. I had completely forgotten that I used a piano hinge along with a stay to hold the lid. It works well though was a bit of a challenge on the hinge. And yes, the hinge and stay are both bright brass as those were the only ones I could find at the time.
DSC00183.jpgDSC00184.jpgDSC00185.jpg
I hope this helps and wasn't too late.
Wow, I just looked at these photos and the coloring is really bad.
Mark
Last edited by Mark Blatter; 10-09-2013 at 12:47 PM.
Reason: Add information
-
Have you looked at the Rockler Lid-Stay Torsion hinge? Even comes in rustic bronze.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules