Results 1 to 2 of 2

Thread: Assembly table

  1. 10-06-2013, 8:45 PM #1
    Greg Hines, MD's Avatar
    Greg Hines, MD
    Greg Hines, MD is offline [OP] Contributor
    Join Date
    Feb 2008
    Location
    Lawrenceburg, Tenn.
    Posts
    1,133

    Assembly table

    Spent some free time this weekend on a new assembly table. I had been slowly accumulating the parts needed for a Kreg table, as I do some pocket screw joinery, and had a couple of their rails, but never did get around to building it for one reason or another.

    Then I got an email for this:

    http://www.woodpeck.com/xmat.html

    They fit great together, and being 3/4" thick, allows you to use the Kreg clamps or any of their attachments. I also like that it is also made of a type of plastic that glue does not stick to it, and it is easy to expand as needed.

    Doc
    Attached Images Attached Images
    As Cort would say: Fools are the only folk on the earth who can absolutely count on getting what they deserve.
    Reply With Quote Reply With Quote
  3. 10-13-2013, 10:31 PM #2
    Greg Hines, MD's Avatar
    Greg Hines, MD
    Greg Hines, MD is offline [OP] Contributor
    Join Date
    Feb 2008
    Location
    Lawrenceburg, Tenn.
    Posts
    1,133
    New photo of the table in action, clamped to the Workmate, and with clamps and guides in place. It has two cleats under it, so that you can easily clamp it to the dogs in the Workmate top. It works pretty well. Now, when the time is right, kitchen cabinets.

    Docphoto(1).jpg
    Last edited by Greg Hines, MD; 10-13-2013 at 10:43 PM.
    As Cort would say: Fools are the only folk on the earth who can absolutely count on getting what they deserve.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules