Results 1 to 11 of 11

Thread: Someone Help Me name This Font plz

  1. #1
    Join Date
    Nov 2010
    Location
    Conyers Ga
    Posts
    188

    Someone Help Me name This Font plz

    Need to Find out what the Font is ?

    fontwhat.jpg

    Cheers
    Dean Fowell

    Support Engineer
    Cad Cam Solutions



    Georgia USA Previously Down Under
    Corel, Inkscape, Solidworks, Solid Edge, Lasercut 5.3, PhotoGrave 3.0 Radan, Tool Shop Cad Cam, AutoCad 2013, Radan Cad Cam , Visiual Macro
    FLC1490 80 watt, Shopbot

  2. #2
    Join Date
    Dec 2009
    Location
    Vermont
    Posts
    1,484
    I would say it's close to Nisswa Plain, but the tops and bottoms
    are heavier on Nisswa. So I'd use them in Photoshop and rasterize
    the text. Then I'd clip off the top and bottom. It would work, but
    not sure how to do that in Corel.

    There were other fonts that were close, but this is the only
    one that had that "R" with the curled up footie

    http://www.myfonts.com/fonts/sparkytype/nisswa/plain/
    Last edited by Chuck Stone; 10-13-2013 at 8:54 PM.

  3. #3
    How about CentSchbkCyrill BT? I am no expert in font but the capitols all seem the similar.
    Epilog Helix 40 Watt, Very well equipped woodshop

  4. try american typewriter condensed
    Clyde Baumwell
    Print Specialist
    ULS 20, 30 Watt
    Epson Wide Format Printers
    Apple Mac Computers
    Photoshop, Illustrator, InDesign

  5. #5
    I went to WhatFontis.com and it came up with 100 possibles-- The font is unique in that the serifs are all squared off, no curves. The closest I could find in the 100 is the URW Typewriter Medium- It's almost an exact match EXCEPT for the cap R, your sample has a curly tail, the font's R doesn't. Also, the font is wider but that's easy enough to adjust!

    fonttest.jpg
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE- make that FOUR now - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


  6. #6
    Egyptian 710. It is in several versions of our Corel Draw CDs

    Here's a CD ver 9 file converted to curves.
    Attached Files Attached Files
    I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."

  7. Dean...did you look at American Typewriter Condensed like I suggested?
    see attachment
    Attached Images Attached Images
    Clyde Baumwell
    Print Specialist
    ULS 20, 30 Watt
    Epson Wide Format Printers
    Apple Mac Computers
    Photoshop, Illustrator, InDesign

  8. #8
    Join Date
    Dec 2009
    Location
    Vermont
    Posts
    1,484
    Clyde .. do you have a link for that?
    Because when I looked up that font on Google,
    what I saw didn't resemble this very much..

    Then again, some of those sites rename fonts for no
    apparent reason.. except maybe to avoid licensing fees..

  9. #9
    Clyde, That is a different font then the example above. Take a close look at the R and the style of the serifs. American Typewriter has curved serifs with dips in the centers and a different R. The example above is Egyptian 710.

    Chuck, The image Clyde posted is American Typewriter Condensed. Do a search on ITC American Typewriter font and that should come up.
    Last edited by Mike Chance in Iowa; 10-15-2013 at 1:15 PM.
    I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."

  10. #10
    Join Date
    Nov 2010
    Location
    Conyers Ga
    Posts
    188
    Thanks all I can got it now on the Laser it goes
    Dean Fowell

    Support Engineer
    Cad Cam Solutions



    Georgia USA Previously Down Under
    Corel, Inkscape, Solidworks, Solid Edge, Lasercut 5.3, PhotoGrave 3.0 Radan, Tool Shop Cad Cam, AutoCad 2013, Radan Cad Cam , Visiual Macro
    FLC1490 80 watt, Shopbot

  11. #11
    Definitely the Egyptian font Mike put up, it's right on the money
    ========================================
    ELEVEN - rotary cutter tool machines
    FOUR - CO2 lasers
    THREE- make that FOUR now - fiber lasers
    ONE - vinyl cutter
    CASmate, Corel, Gravostyle


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •