Hi all,

since my exhaust system only extracts from top of the material, I sometimes have problems with residue when cutting acrylic. Somebody told me to build a box with a hole and hook up a vaccum cleaner to also extract from the bottom of the table that would avoid the problem. Besides that my vaccum cleaner does not extract anything though my cutting table I'm also considered about the fumes. On my exhaust system I have 4 possibilities to install a hose, the large one is connected to the laser on the back of the exhaust there are 3 smaller holes to hook up a hose.

I wonder if I can hook up a second hose to the exhaust and connect it to my box

Thx for advice, Andrea