Page 1 of 3 123 LastLast
Results 1 to 15 of 38

Thread: Wood ID?

  1. #1
    Join Date
    Oct 2007
    Location
    Fort Worth, TX
    Posts
    1,389

    Wood ID?

    Any ideas on this wood? It was from a trunk I can't identify. North/Central Texas area. Very dense, and was stubborn to cut with the chainsaw (see picture for tight growth rings?)

    It turns smooth, has a medium/dark brown heartwood, and a light sapwood.(white, not yellow, the pieces are anchorsealed, so that causes the yellow you see in the pictures)
    Attached Images Attached Images
    Grady - "Thelma, we found Dean's finger"
    Thelma - "Where is the rest of him?!"

  2. #2
    Join Date
    Sep 2008
    Location
    Gassaway, WV
    Posts
    1,221
    Looks like maple to me.
    Fred

  3. #3
    Join Date
    Oct 2007
    Location
    Fort Worth, TX
    Posts
    1,389
    It could be. I am not familiar enough with maple (90% of what I see i north texas is oak and pecan/hickory)
    Grady - "Thelma, we found Dean's finger"
    Thelma - "Where is the rest of him?!"

  4. #4
    Join Date
    Jan 2011
    Location
    Fort Worth, TX
    Posts
    290
    http://www.hobbithouseinc.com/person...cs/hickory.htm
    now that I look at it, looks more like the hickory page.
    -------------------------------------
    Adrian Anguiano

    "For I know the plans I have for you," declares the LORD, "plans to prosper you and not to harm you, plans to give you hope and a future". Jeremiah 29:11

  5. #5
    Join Date
    Jan 2011
    Location
    Fort Worth, TX
    Posts
    290
    and while I'm guessing how bout elm? http://www.hobbithouseinc.com/person...20american.htm
    -------------------------------------
    Adrian Anguiano

    "For I know the plans I have for you," declares the LORD, "plans to prosper you and not to harm you, plans to give you hope and a future". Jeremiah 29:11

  6. #6
    Join Date
    Sep 2011
    Location
    Austin, TX
    Posts
    29
    If it stinks when you cut it, it's probably cedar elm.

  7. #7
    Join Date
    Oct 2007
    Location
    Fort Worth, TX
    Posts
    1,389
    There was no odor at all when I was turning it or chainsawing it.

    Adrian, It could be elm, but it has such tight growth compared to most elm I've seen (I know that isn't a function of the tree as much as it is the rain/environment, but is something to consider).

    I am leaning towards a maple, but it is a dang hard maple, but if that other tree we cut Adrian is maple, this one is a heck of a lot denser and harder.
    Grady - "Thelma, we found Dean's finger"
    Thelma - "Where is the rest of him?!"

  8. #8
    Join Date
    Jan 2011
    Location
    Fort Worth, TX
    Posts
    290
    The only maple Ive had "that i knew what it was" was silver maple. And it was soft and light. no where near that heavy and dense.
    -------------------------------------
    Adrian Anguiano

    "For I know the plans I have for you," declares the LORD, "plans to prosper you and not to harm you, plans to give you hope and a future". Jeremiah 29:11

  9. #9
    Grain and wood color look like osage orange to me. When fresh, the smell kind of reminded me of tire rubber. It is very hard.

    robo hippy

  10. #10
    Join Date
    Oct 2007
    Location
    Fort Worth, TX
    Posts
    1,389
    Not osage, I've done a good share of osage. The yellow tinge you see is from the anchorseal.
    Grady - "Thelma, we found Dean's finger"
    Thelma - "Where is the rest of him?!"

  11. #11
    Join Date
    Nov 2009
    Location
    Peoria, IL
    Posts
    4,546
    another vote for maple

  12. #12
    Join Date
    Jun 2009
    Location
    Western Maryland
    Posts
    5,548
    The thing is, there are SO many species of maple... I, too, think it is a maple...but which one? Yeah, Silver Maple is very soft (for a maple) and grows quite quickly. The stuff I have in my woods is what we refer to around here as swamp maple...kinda medium density, but the ambrosia beetle loves it, so, I don't care. Some maple, mostly what you find as lumber is hard maple. Very tight grained, quite dense, sometimes even has that dark green coloration nearer the pith. As a flat workers, we always hated seeing that green. As a turner, any coloration is good... When you find birdseyes, I think that is almost always hard maple. But any of the maples with get burls and curl.
    I drink, therefore I am.

  13. #13
    Join Date
    Aug 2013
    Location
    Alexandria, LA
    Posts
    105
    Red Elm, perhaps?

    Color/Appearance: Heartwood is a light to medium brown, sometimes with a hint of red. Sapwood is a pale white or cream color.

  14. #14
    Join Date
    Jan 2008
    Location
    Paradise PA
    Posts
    3,098
    deffinatly not maple based on the endgrain picture. Maybe elm or locust?
    14x48 custom 2hp 9gear lathe
    9 inch pre 1940 craftsman lathe
    36 inch 1914 Sydney bandsaw (BEAST)
    Wood in every shelf and nook and cranny,,, seriously too much wood!

  15. #15
    Join Date
    Mar 2007
    Location
    Middletown, Ohio
    Posts
    286
    Hickory, dulls blades as if cutting stone.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •