that happen to look like a small tableDSCF0022.jpgDSCF0015.jpgDSCF0017.jpgFound a pine 1x6x60, turned into a glued up top. Some barn siding, glued up into a small shelf. Couple of painted 2x4 scraps, ripped and planed into legs. Aprons were from a 1x4 that was bought for another project. Added a few curves, here and there. Ends of the shelf have nailed on curved pieces. Finish was what was in the shop.....Minwax Olde Maple Polyshades. A second coat evened things out. Some looks at the details?DSCF0007.jpgDSCF0009.jpgDSCF0014.jpgused an old B&D sabresaw for the curved work. Shelf was notched to fit into the legsDSCF0032.jpgDSCF0042.jpgand a matching notch was cut into the leg. A screw was added from the outside. Each leg was champfered on it's outside corner, to match the size of the screw's head.