[OP]
Member
Looking for a source for steel screws like hinge screws. In particular #6, oval or flat head, but in different finishes, nickel, antique brass, black, brass etc.. I recall that there was a good source for these years ago when I did cabinetry. We would toss the brass screws and use steel replacements. Lee valley is good but they don't have oval heads like this. Thanks!
I too have been on a quest with only occasional success and limited finishes. I will be watching this thread with anticipation ;-)
"A hen is only an egg's way of making another egg".
– Samuel Butler
My local ACE has a few in the slide-out boxes, Midwest Fasteners IIRC. Dark bronze, oval head 1/2" and 3/4" in #4, 6 and 8.
Contributor
McFeelys has steel flat heads of several different colors. http://www.mcfeelys.com/ No oval heads, IIRC.
Member
Hafele is always a good source - Look at other pages in the catalog for a greater selection - but these seem to fit some of the OP's criteria
Screen Shot 2013-12-02 at 9.50.03 PM.jpg
"... for when we become in heart completely poor, we at once are the treasurers & disbursers of enormous riches."
WQJudge
Member
Blacksmithbolt.com has a somewhat irregular selection. But if they have what you need, the quality is very high.
Contributor
Lee Valley has a selection that may work for you.
Grant
Ottawa ON
Posting Permissions
Reply With Quote
