I'm in the market for a bandsaw that will not see resawing as the primary use. Browsing the specs from various manufactures shows significant difference in bandsaw table sizes, where table saws all seem to be the same.
Examples:
Grizzly 14" 20" x 14"
Grizzly 17" 23" x 17"
Grizzly 19" 26" x 19"
Laguna 14" 19" x 15"
Laguna 18" 20" x 20"
So what drives the size of table that manufactures place on their bandsaws? Larger tables for resawing?
Is table size something that should be considered when purchasing a BS primarily for non-resaw use?
Is it difficult to add an extension to a BS table, whether it's the outfeed or right side of the blade?
Thanks.