I'm running a new carbon steel blade on my MM24 Minimax. 2TPI Hook, and 1".
Resawing 6" cherry, bogs the 5hp motor, if I feed it too fast.
If I keep bogging the motor for 4 or 5 boards, the internal breaker on the saw's switch trips, and I need to let it sit for 15 or so minutes, before it'll turn back on.
The saw's about 7 years old.
Does that seem right?

My sister resaws wider boards than that, on her 24" Grizzly saw, and she says it never even thinks of bogging down.
She's resawing with a 1/2" blade, at 3TPI.