I have a shop Fox remote control for my 220 voltdust collector. Recently encountered this problem. One of theremote transmitters would start up the DC but as soon as I released the switch,it would quit. The other transmitter would not work at all.

Openedit up to replace the battery and before doing that, tried the other remote andit worked fine as intended. Put a new battery in the other remote andsame problem -- it starts the DC but as soon as you release the start switch,the DC motor shuts down. And the other remote doesn't work.

Okaystrange, took the battery out of the one with the startup but not continuousrun problem and the other remote now works. So for some strange reasonthe good remote works only when the other remote does not have a battery in it.

Ofcourse I found to replace it, Shop Fox does not offer replacements.

Hate to buy a whole new setup just to have two working remotes so I wondered is their anyway of fixing the bad remote or finding another remote that would operate the DC?