I'm going to be building a light fixture. 3 sided box, 6"x36", 12 mason jar lights hanging down from bottom of box, crown molding around sides and up against ceiling. Similar to the one here http://shelleytumino.blogspot.com/20...elier.html?m=1. I'm trying to figure out a way to make the 'inside' easily accessible for mounting. Some of the designs I've seen just use toggle bolts or have the mounting hardware visible but I'm not comfortable with that. My thought is to build the box in 2 parts: 2 ends and one long side with the molding attached, 1 long side with the crown molding attached. Grove the first part (2 ends and 1 side) to slide onto the bottom after it's mounted. Kinda like you would do a drawer bottom. Does anyone see any potential issues with this or maybe have a better suggestion? I appreciate all advice as I've never built anything like this.