juGuys,
My Trotec Speedy 400 has developed a very strange problem - and as usual it's the weekend (!)
The engraving of text is all screwed up - with the correct depth in the middle, fading out to either end.
A client noticed it the other day and I thought the material was bowed - but I tried some tests tonight in the shop and it's definitely repeatable.
I have tried it on two separate machines - both loaded with Job Control X 10.0.1.0
I have restarted everything and no difference.
Mirrors / lens are clean - no junk in the nozzle.
I'm at a loss and I need to work over the weekend - Trotec is shut. Machine is only about six months old. 80W CO2.
Has anyone seen this before? - or any suggestions as to what I might be able to do?
Pic Attached...
laser_problem_17Jan2014.jpg
Thanks in advance
Tony