I have an older grizzly 1023 saw and im looking at putting a vega pro 50 on it does any body know if it will bolt right up and do I need leg under the rails for support thanks
I have an older grizzly 1023 saw and im looking at putting a vega pro 50 on it does any body know if it will bolt right up and do I need leg under the rails for support thanks
I have a Vega Utility 50 on a Grizzly Go661, bolts right up. Not exactly your set-up, but all the mounts should be the same.
I do like my Vega fence, and it made in Decatur Il too, only about 30 min north of me.
Jim
I have the Pro 50 on an older 1023z and it bolted right to it. I built a side table with supporting legs for it.