I'm trying to find this:
Kohler Stator Part # 41-085-06-S
I need one for a TroyBilt Horse Tiller
Kohler 8 HP motor (K181T-301018)
Other than that....how do I get this tiller working again if I can't find a replacement stator???
I'm trying to find this:
Kohler Stator Part # 41-085-06-S
I need one for a TroyBilt Horse Tiller
Kohler 8 HP motor (K181T-301018)
Other than that....how do I get this tiller working again if I can't find a replacement stator???
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.
Try this place. I've had good luck with them...www.ereplacementparts.com/
Try checking with Kohler or another small engine parts company to see if 4108507 supercedes the old PN 4108506. Here are some examples of many sources for PN 4108507 including http://www.jackssmallengines.com/Pro...055489/60803/s and one on ebay for $80 that are supposed to fit K181 engines.
Good luck,
Dick
check out john deere dealers they use kohler engines on some of their equipment but they call their engines by a different name. I get parts for mine all the time from them. Also check out Ebay I buy new parts there also
I have a TroyBilt with the 6HP Tecumseh. The engine blew up last fall. I ordered a 6.5HP Honda from Small Engine Warehouse. So if all else fails, here is a replacement option. I was able to run it a little bit before winter set in. The Honda made a huge performance increase on my 1983 TroyBilt. The basic tiller was in excellent condition. It now runs better than ever.
Best of luck,
Ed
"Not everything that can be counted counts, and not everything that counts can be counted." -- Albert Einstein
Dennis,
Check your local Cub Cadet dealer. The early model Cub Cadets were Kohler powered, the same engine as you have on your Troybuilt I think. I have a Cadet Model 72 built in 1964 that has the same engine. I may have what you need in my spare parts bin, if I do I will get back to you ASAP.
.
I have check about 8 different online supply houses. None of them have it.
The part I need is part 10 in this diagram:
https://www.partstree.com/parts/?lc=...catalogs_19060
Here is a picture of the part:
Last edited by Dennis Peacock; 01-28-2014 at 7:13 PM.
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.
This site lists the part for $144.63 and it lets me put it in the cart. No gurantee that they actually have it.
Lee Schierer
USNA '71
Go Navy!
My advice, comments and suggestions are free, but it costs money to run the site. If you found something of value here please give a little something back by becoming a contributor! Please Contribute
I have no idea about this company, Just found it via Google.
http://www.jackssmallengines.com/Par...8506/757578/PL
Last edited by Dave Lehnert; 01-28-2014 at 8:20 PM.
"Remember back in the day, when things were made by hand, and people took pride in their work?"
- Rick Dale
The coil kit by itself(PN 47-755-20-S) seems to be available.
http://www.searspartsdirect.com/part...rt=47-755-20-S
Should be available elsewhere as well
Jacks Small Engines lists it....but they truly don't have it. I've called them to make sure before buying.
Lee, I've sent an email to Troybilt Parts online folks you linked for me. They do list it, but the other 9 places I tried listed it, but I was refunded on 2 of them because the charged my card before confirming inventory.
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.
If you got no spark then the magneto coil can be replace on some models without buying the mounting plate
Lee,
Troybilt Parts Online.....No Go.....They list it...but don't have it.
Ray Hampton......I'm game....do you have any suggestions and locations for the part?
Thanks & Happy Wood Chips,
Dennis -
Get the Benefits of Being an SMC Contributor..!
....DEBT is nothing more than yesterday's spending taken from tomorrow's income.
I was working on small engines at the time and I had excess parts to rebuild magneto, take your magneto assembler to a small engine shop / lawn mowers -motor cycle-outboard engine-tool rental equipment rental and they should be able to find a part for you, DID YOU set the gap between the flywheel and magnet ?