I always browse this section but never post anything in it, so I thought I would contribute to it this time. I just finished up another coin table. I build this fairly often as they seem to be a hot item around here. This is designed to hold and display military type coins. It's made of walnut and the finishing schedule was 1 coat of American walnut solar lux dye diluted 50%, 1 coat of shellac to seal it in, Dark Walnut gel-stain, and 3 coats of pre cat urethane sprayed on. Everything else was wiped or brushed.
My wife and I were just playing around with the sheet and lighting to take pictures of this one.