[OP]
Member
Since google isn't showing up anything for me I figured I would ask here. I need to replace the bearings on a boat trailer I have. The problem is the bearings aren't a normal trailer bearing. The inner and outer bearings are combined into one unit that is brazed into the hub which is made of laminated square pieces of 1/4" thick steel. The spindle on the axle is 1inch in diameter and only 1 1/4 inches long. Can anyone point me in the right direction to find new bearings/hubs for this trailer?
Universal M-300 (35 Watt CO2)
Universal X-660 (50 Watt CO2)
Hans (35 watt YAG)
Electrox Cobra (40 watt YAG)
Glass With Class, Cameron, Wisconsin
Contributor
I've been boating since the '70s, and we currently have 4 boats- In all that time (and much of it spent on boating forums) I've never heard or seen of such a bearing setup. Sounds home-made to me, and I'm thinking you'll save a lot of headache by just replacing the axle with a "regular" one.
I'd love to see some pics!
========================================
ELEVEN - rotary cutter tool machines
FOUR - CO2 lasers
THREE- make that FOUR now- fiber lasers
ONE - vinyl cutter
CASmate, Corel, Gravostyle
[OP]
Member
I have a feeling that is what I may end up doing. I have a feeling that this set up may be more common in other countries. But since I don't know what to call it I can't find parts online nor at a nearby trailer supply shop.Originally Posted by Kev Williams
Universal M-300 (35 Watt CO2)
Universal X-660 (50 Watt CO2)
Hans (35 watt YAG)
Electrox Cobra (40 watt YAG)
Glass With Class, Cameron, Wisconsin
Member
A friend of mine is in the trailer business. He has a fair amount of different hubs etc. He is located near Slinger, WI I don't know where Cameron is located but you might try them. They also make axles at a decent price and can ship The business is Snobird Trailers and his phone number is 262-644-6599
Perhaps they can help you out.
Member
How about a photo?
Posting Permissions
Reply With Quote