Well, I finally started work on my bow arm,Metro Morris chair, a contemporary Stickley design on the classic. I thought I would post some pics as the process unfolds. The pictures included are of the basic box of the chair from the rear view and the stack of milled Walnut waiting to become slats. All four Walnut legs of the chair are double splayed and the stretchers, arms and back are Cherry. I am not working from plans so I have just taken some measurements off a classic Morris Chair and worked off a picture posted on the Stickley website. So far so good. I guessed at the angle for the legs (3 degrees front and 6 degrees back) and put a 1" splay on the front and outside edges. I still need to do work on the box including mortising for the slats, but wanted to get it dry fit to take a look at it. I have my bending forms build and will begin the arms soon.