It took me forever to get this little job done even though it has been at the top of my shop improvements list of things to do. Work kept getting in the way but I got it done this weekend.
Awhile back I mentioned that I had replaced one of the 6 by 6 wooden posts in my shop with steel pipe. This was the first step in the project, the last few work items were finished today. You can probably tell from the pictures that the goal is to have a means to hold a variety of projects, tools and minor machines like metal benders, sanders and buffing motors. I have a small aluminum table that I use in various situations that can also be held in the vise and I will soon have a new table top mounted on a commercial lazy susan bearing that I hope will be handy for routing circular stuff.
Reply With Quote