Does anyone have a source for blank wooden rulers? I'd like to engrave them but not cut them. Thanks!
Does anyone have a source for blank wooden rulers? I'd like to engrave them but not cut them. Thanks!
Epilog Mini 24 - 45 Watt, Corel Draw X5, Wacom Intuos Tablet, Unengraved HP Laptop, with many more toys to come.....
If you have an apple and I have an apple and we exchange apples then you and I will still each have one apple. But if you have an idea and I have one idea and we exchange these ideas, then each of us will have two ideas... George B. Shaw
Blank wooden rulers ?? Could you use paint stirrer sticks & do your engraving ? A wooden blank is just that a blank piece of wood until you do your engraving. Can you expand on what you are after ?
Steve,
Just curious. Do you mean blank, as in absolutely nothing on them? Or blank as in they have the measurements printed, but nothing else so you can personalize them? For either, are you looking for metal edge wooden rules? Or just wood?
Sorry for all the questions. I was on hold for a while and while I waited I hunted a bit. So far the only completely blank rules I found were folding wooden rulers. All others had measurements printed but could be personalized beyond that. Aliebaba was who had the folding rules. This was only about 5 minutes of hunting though.
Just FYI.
Dave
900x600 80watt EFR Tube laser from Liaocheng Ray Fine Tech LTD. Also a 900x600 2.5kw spindle CNC from Ray Fine. And my main tool, a well used and loved Jet 1642 Woodlathe with an outboard toolrest that helps me work from 36 inch diameters down to reallllllly tiny stuff.
Steve, you might try Evans. They are in California and imprint rulers. They may sell you blanks. Sales # 800-745-3826.
Thanks Darryl.......they do.
Epilog Mini 24 - 45 Watt, Corel Draw X5, Wacom Intuos Tablet, Unengraved HP Laptop, with many more toys to come.....
If you have an apple and I have an apple and we exchange apples then you and I will still each have one apple. But if you have an idea and I have one idea and we exchange these ideas, then each of us will have two ideas... George B. Shaw
Steve NEMROC might have what you want also
http://www.nemroc.com/productsandser...oodblanks.html
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
Blank rulers? Look under sticks.
Mike Null
St. Louis Laser, Inc.
Trotec Speedy 300, 80 watt
Gravograph IS400
Woodworking shop CLTT and Laser Sublimation
Dye Sublimation
CorelDraw X5, X7
Every time I come to this site, I leave with more ideas of things to burn! lol
Keith Upton
Aerodrome Accessories
Epilog Mini 24 - 60w
Laserbits has a nice 12" Maple Ruler that has inches and millimeters marked, with a large flat area to engrave whatever you want.