Has anyone made/found a frame for a 4" laser tile? Got pics? Am looking for ideas before I make a template and dig out the router...
Has anyone made/found a frame for a 4" laser tile? Got pics? Am looking for ideas before I make a template and dig out the router...
Steve \o/Dynamite With A Laser Beam LLC
Epilog Helix 75W/Epilog Fusion Edge 80W and Jet 1642-EVS2
I haven't purchased from them in 5+ years, but I think Aftosa.com may have what you are looking for. They used to have several wood products for different size tiles.
I read recipes the same way I read science fiction. I get to the end and I think, "Well, that’s not going to happen."
Mark
In the Great Northwest!
Trotec Speedy C25, Newing-Hall 350 (AMC I & HPGL), NH-CG-30 (Carbide Cutter Sharpener)
Sawgrass 400 Gel Ink Printer, CS5, 5/9/x6 CorelDraw
They actually measure about 3.875" square. Thanks guys, these are what I was looking for!
Steve \o/Dynamite With A Laser Beam LLC
Epilog Helix 75W/Epilog Fusion Edge 80W and Jet 1642-EVS2
Steve, i make my own, easy and cheap. I will try to find a pic for you. What i do is cut a piece of 3/4" ply or mdf the size of the tile. I then rip strips of wood(i use walnut just because i think it looks nice) 1" wide by 1/4" thick. Trim the edges of
the ply with it, just but joints, finish, pop in the tile.
IMG_0607.jpgIMG_0606.jpg
Chad Fitzgerald
Hickory Grove Cabinetry
Custom Woodworking/Laser Engraving
Laser Pro Spirit 40W
ShopSabre RC4 CNC
55x49 cut area
with 3 1/4 PC Router, 10" Z