Originally Posted by
Brent Ramsay-Boyd
I see, it is probably the same as the interval setting in my software. Will give it a try.
Interval is the space between the lines, its kinda like DPI is to printing but in reverse. The higher the interval is means the lines are more spaced apart so you'll get a crappier result, On my machine depending on the material being engraved I set the interval between 0.1 and 0.25
0.15 interval works for me on standard MDF. That said there are a few of different grades of MDF, Lite is softer than Standard and MR (moisture resistant) is harder than standard so depending on what you are using you may need to play with your power settings as well.
I'm Back.... & Currently Using a 500 x 300 50w C02 Shenhui Laser
with Corel Draw X5, RdWorks Ver8, Adobe Master Collection CS5, Ratsus Plugin for PhotoShop instead of Photograv.