Is 550 cfm enough air flow for an epilog helix 24 2009? Love to hear your input anyone.
Is 550 cfm enough air flow for an epilog helix 24 2009? Love to hear your input anyone.
From the Helix manual which can be downloaded from Epilog website.
All Epilog model 8000 laser systems require an exhaust fan that is rated
at a minimum of 400 CFM at 6” of static pressure 680 M3 /hr. at 150 mm of static
pressure.
Epilog 45w Helix X3/X5 Corel Microflame Generator (flame polisher) Heat Bender
Michael Gonzales
Epilog Legend 24 TT 45 watt-
Vision Max Pro- Vision Expert 8
CorelDraw x5- Ricoh GX 7000
Geo Knight DC16
Frank ,This is the first laser that I bought and do not know very much about them other than the things I read online here on SMC which has been extremely informative. The reason I asked is because I have an old DC from a wood shop that is rated at 553 cfm. I was just trying to cheap out if possible. As to what i am going to engrave… not sure yet. Thanks for the info.