I have a 4x8 workbench that is built with 4x4 timbers and 3/4 plywood top and shelves. On it I have my old Craftsman RAS on a 6" (or so) stamped metal box. The stand up tube and arm assemble just bolt to the box with 4 bolts. I use it a lot and every time I use it I have to put two DIY roller assemblies on the work bench to hold up the 8 or 10 foot boards that I cut down. SOOOO. I am thinking about just removing the box and bolting the assemble right to the workbench so the long boards will be flush all the way across the table. I know I'll have to deal with the up/down crank, but other than that, I can't see any other issues....can you??? Thanks for the help.