I have a minimax J/P. Was in the middle of using the jointer and after a couple of hours of constant use (with the power feeder mounted) when I turned it off briefly to empty the dust collection bin couldn't start it again. The start push button doesn't do anything. Usually when you push it it clicks something but right now it is like when the emergency push button is pressed and you have disengage that (but it certainly is not engaged). Here are a few photos of the machine/starter:
20140511_163443.jpg20140511_163452.jpg20140511_163502.jpg
Could it be thermal protect is activated? I left it alone for 20 minutes but no luck. I checked the power and there is power after the padlock. When I turn the padlock I can hear a very small "buzz" from the push-start button unit. I am not familiar with these switches and didn't attempt to open them. Any idea what the issue might be? the very short/un-helpful manual says the thermal protection might have activated and let it cool down..