-
Delete double answer.
George
-
I use the paper trick Mel mentions, for drawers that rub in hidden places.
I would go after the inside corner of the door were it pivots long first.
Then start cutting long strips of paper if that didn't do anything.
Thats my guess from 50 miles away.
-
Jason, You might try chamfering along the inside rail (hinge side) maybe about a 1/4"X1/4" relief chamfer. With the relief the door rail should be able to pass the touching point.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules