for minimax 20" bandsaw owners

[Mastruca e Cambales]

No problem with the 1.0" Lenox Woodmaster CT or Tri-master on our 400 and 500mm saws. I recommend them, in fact. Just de-tension at the end of each use.
Hope this helps,

Erik Loza
Minimax USA

thank you, Erik. Are the tires of the minaimax band saws totally flat or have they a light crown? I recently replaced the crown tires of my acm star 400 with a flat cork made strip glued onto the whells. Now the tracking of the blade is more difficoult

[Erik Loza]

thank you, Erik. Are the tires of the minaimax band saws totally flat or have they a light crown? I recently replaced the crown tires of my acm star 400 with a flat cork made strip glued onto the whells. Now the tracking of the blade is more difficoult

Totally flat.

Best,

Erik Loza
Minimax USA

[Mastruca e Cambales]

Erik, what do you think about the acm star 400 bandsaw: are it's performance equivalent to minimax 16 or not?

[Erik Loza]

Erik, what do you think about the acm star 400 bandsaw: are it's performance equivalent to minimax 16 or not?

"Performance" in what way?

Erik Loza
Minimax USA

[David Kumm]

ACM star is their lighter duty series machine. Not the equivalent of the Centauro based MM. I had the heavier model ACM 440 and it was lighter than the MM16 as well. Dave

[Mastruca e Cambales]

"Performance" in what way?

Erik Loza
Minimax USA

Attitude to resawing work, independently to maximum hight cut capacity