Hi guys! This is my first post although I have been a log time voyeur of this forum. I have great respect for the knowledge that shows up here and I guess felt somewhat intimidated to join as I am relatively junior hobby wood worker. My passion is in furniture building. With that being said I am finally going to upgrade my HF jointer to an 8" helical cutter head jointer. From my research I have narrowed the field to two. Grizzly C0656PX and Steel City 40660 (http://www.steelcitytoolworks.com/in...ical-head.html). I am attracted to the Steel City jointer as I like the thought of the granite tables not to mention it is about $200 less than the Grizzly. My concern with the Steel city is that I cannot find any real reviews on that jointer. Things like durability of the tables, does it hold the alignment, quality of the motor, support from the company, etc... I have read that a few years ago there was concern about Steel City's viability as a company but they are still around today. I was hoping somebody on this forum would have first hand knowledge of this particular jointer and could help with my final decision. Thanks in advance.