[OP]
Contributor
Sheet goods storage rack - what do you use?
I need to build some storage racks for my engraving sheet goods. Most of what I have is 12" X 24", and anything I have that is larger I am thinking of cutting down to that size. I may have a separate section to store 24" X 48" that I want to keep as one sheet.
I was hoping people could post some pictures of their storage racks in this thread to give me some ideas.
Thanks,
John
Epilog Helix Laser 40w
Rotary: NH Vanguard 7000 with Q1E Controller
Graphtec FC8000-75 Plotter
Sand Carving (Stone and Glass)
Phoenix CNC (12X18")
Corel Draw, Vectric VCarve Pro
Moderator
John, this was posted a week or two ago :
http://www.sawmillcreek.org/showthre...terial-Storage
Lasers : Trotec Speedy 300 75W, Trotec Speedy 300 80W, Galvo Fiber Laser 20W
Printers : Mimaki UJF-6042 UV Flatbed Printer , HP Designjet L26500 61" Wide Format Latex Printer, Summa S140-T 48" Vinyl Plotter
Router : ShopBot 48" x 96" CNC Router Rotary Engravers : (2) Xenetech XOT 16 x 25 Rotary Engravers
Real name Steve but that name was taken on the forum. Used Middle name. Call me Steve or Scott, doesn't matter.
[OP]
Contributor
Cool - thanks! Just what I needed.
Epilog Helix Laser 40w
Rotary: NH Vanguard 7000 with Q1E Controller
Graphtec FC8000-75 Plotter
Sand Carving (Stone and Glass)
Phoenix CNC (12X18")
Corel Draw, Vectric VCarve Pro
Posting Permissions
Reply With Quote