Hi guys,
I need help. I've been working with Grizzly tech support and the vibration problem I have on my saw is getting worse.
I've uploaded to youtube a series of videos showing the problem - am I overreacting to what I see as a problem? My cuts are wavy like rippled potato chips.
grizzly has sent me new tires, a new bottom wheel and new tires again. I've installed a link belt. The new bottom wheel made things even worse (the new wheel they sent is junk - holes and riveted plates to balance it).
I'm tired of dealing with this saw - I've taken it apart so many times I can't even recall the number.
I'd love to have a smooth saw but this one is not it for me.
Here is the first video - there are a series of them under this account
http://youtu.be/B5sNnCNKmzg
what would you do? I also bought four timberwolf blades so if I return the saw I'm out that money as well. All blades show the same vibration so it isn't coming from there.
I've expressed my frustration with tech support - over a dozen emails from me alone working through this - pictures, videos, lots of testing and measurements. I'm tired and just want to use my saw to build something.
Please let me know what you would do...
Jon