The "Good"
IMAG0193.jpg
New Haven Edge Tool Co. 1/4" Mortise chisel With a red rubber tip protector, too
The not quite as good
IMAG0187.jpg
Scioto Works #8 with an Ohio Tool Co. tapered iron. Missing the bolt between the iron and chipbreaker. Needs a strike Button on it's backside. Maybe two smallish cracks..
And now the UGLY that came as part of the dealIMAG0189.jpg
13" of pure ugliness. Rusty & Crusty Supreme. This does not have one of those Pressed Steel Frogs, It do have something.....different
IMAG0191.jpg
Or is it even a frog. This one will require a wee bit more work than the usual 2 hour rehab
IMAG0192.jpg
haven't found any markings on it...yet. Not even sure WHAT colour it was....besides rusty-red. Wonder if a soak in PB Blaster would even make a dent.