Quote Originally Posted by Peter Quinn View Post
Issue is now its wet on all 6 sides...and its in the booth, how to move it to drying area. We ran assembly screws into the blind area on the backs where the drawer box covers, shoot the backs, flip, shoot the edges, shoot the face, walk it away holding the assembly screws. You have to have a lot of horizontal drying space, racks don't do well this way. I suppose you could even drill a shallow false 35mm pocket to use the door hangers too, again into the blind spot.
We have nails driven through ply scraps. You move it to the drying rack with the ply. No need to touch the part. You need them anyway to flip if you wet your edges spraying the back