Hello All,
Ive scouring this forums for the past few weeks getting information on laser cutting. I have all the bugs in my machine worked out and cutting well (Thanks to comments users on this forum have left & Past threads) I bought all the colors of acrylic and other materials I could find now i have a few questions
Best way to cut acrylic sheets ?
Should I remove the protective film on both sides ?? Then apply transfer tape ??
I found about 11 colors locally - Any one have a good source for more colors at a good price ?? Im looking for pink
Colors I have : Green, Red, Black, Blue, White, Bronze, Gray, Trans Red, Trans green, Trans yellow, Trans Blue
Paper
Anyone know a good place to get Laser friendly paper ??
I own a large format printer that uses roll paper and Ive tried this but it tends to get burnt and yellowed very easy (Made to be printed on not laser cut I guess)
Anything I can apply to the paper to help it not yellow as much
1/8 Wood
Tried home depot and local lumber yards - Best I can find is nice 1/4 plywood
Any good suppliers ?? Looking for bamboo, Birch, walnut
I found a few places but were talking 40 dollar 12 x 12 boards ( Crazy Pricing )
Any Help would be appreciate
Thanks in Advance
Robert