Hello all,

I thought I had everything planned out but now I'm starting to second guess myself. I wanted to get people's opinion on here. I've got a wall that's 64 sq ft (~9 ft high x ~7 ft wide) and I'm covering the wall with walnut boards similar to this:

http://www.marioncrown.com/media/cat...k_natural1.jpg
http://woodflooringtrends.files.word...photo-2-21.jpg

I would like to have no nail/screw holes or plugs or anything other than the face of the walnut so my plan is/was to use this stuff:

http://www.homedepot.com/p/Loctite-9...9157/203011334

and just stick it right up on the painted drywall. My boards vary in length/width/thickness. Lengths from 1ft to 4 ft, widths from 3" to 7", and thicknesses from 1/8" to 1". Will this be too much weight on the drywall? Is there a (good) chance of the drywall paper pulling away over time from the weight? I've seen (and made) large drywall walls covered in tile which I imagine can get quite heavy and they seem to be fine. But I think this walnut wall will be quite a bit more weight than a typical tile wall.

Has anyone done this? Any thoughts (whether you've done it or not)?