Results 1 to 8 of 8

Thread: Light-colored Rings on Cherry Spindle

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 10-20-2014, 2:43 PM #1
    Bob Coleman
    Bob Coleman is offline [OP] Member
    Join Date
    Mar 2008
    Location
    Denver, CO
    Posts
    197

    Light-colored Rings on Cherry Spindle

    Hi All,

    I'm building a federal style candlestand that has the birdcage that allows the top to rotate and tilt. I'm new to this turning thing and ended up with these light colored bands on the posts! They popped up after I put a coat of finish on (watco danish oil). I sanded to 320 on the lathe and then scuffed with 220 with the grain.

    Has anyone seen this before? Can I correct it or do I need to turn new spindles? If I need to turn new ones, how do I prevent it?

    Thanksn in advance!
    Bob

    Birdcage.jpg
    Last edited by Bob Coleman; 10-20-2014 at 2:48 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules