When all else fails, read the directions. brought up Craft Supplies utube on Raptor setup tools.You have to set the swivel-arm on the varigrind at 23 degrees in relation to the cutting tool. when you do that, everything works as it should. Max
When all else fails, read the directions. brought up Craft Supplies utube on Raptor setup tools.You have to set the swivel-arm on the varigrind at 23 degrees in relation to the cutting tool. when you do that, everything works as it should. Max
Them darn directions, will get you every time.
Len
Who needs stinkin directions anyway?
Bill