Results 1 to 3 of 3

Thread: King table saws

  1. 11-29-2014, 9:17 AM #1
    Mike Kruk
    Mike Kruk is offline [OP] Member
    Join Date
    Nov 2014
    Posts
    1

    King table saws

    Anybody have any experience with the King Canada 3hp - 10" industrial table saws ? They come with Lesson motors with 2 drive belts and a 52 rip capacity. Seems to be a reasonable price at $1700. Thinking about trying one, to replace my delta contractors saw.
    Thanks for any input.
    Reply With Quote Reply With Quote
  3. 11-29-2014, 3:04 PM #2
    scott spencer's Avatar
    scott spencer
    scott spencer is offline Member
    Join Date
    Jul 2003
    Location
    Rochester, NY
    Posts
    4,717
    If you're talking about the model KC-26FXT/i50/5052, it's a very similar to the Craftex CX201, Grizzly G0690, Baleigh, Harvey, and former Laguna Platunum.





    Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....
    Reply With Quote Reply With Quote
  4. 11-29-2014, 10:38 PM #3
    Frank Pratt
    Frank Pratt is offline Contributor
    Join Date
    Apr 2013
    Location
    Okotoks AB
    Posts
    3,500
    Blog Entries
    1
    If it's like the Craftex, I'd take a pass. I'm currently shopping for a new saw & had a good look at them & was quite unimpressed. Issues with quality, fit & finish as well as design.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules