I have to replace the pull down stairs in my garage and I am have a real hard time finding one under $300 that does not get a bunch of bad reviews. Werner and Louisville seem to have a bunch of problems based on Amazon reviews. The rough opening is 22 1/2" x 54". Can I install a 22" x 54" stair or does it have to be a 22 1/2" x 54" model. If I can install the smaller size, this might open up other opportunities. Anyone here have a Fakro model? Not sure if I really need metal. Wood would be Ok if it was well made. The Memphis model that is installed is pretty poorly made. Must have been a factory second that the builder bought as a cost cutting measure.
Any help is much appreciated.