Hi all, I was wondering if anyone could help me with this problem: I recently had someone ask me if I could make a cribbage board similar to the one in the attached picture, but not with the Harley logo, but something else in the center instead. My problem is with laying out the holes. There has to be 120 holes around the board in each lane, (plus maybe an extra hole at the beginning for a starter hole) all evenly spaced out in sets of five. I'm not sure how to go about laying this out so the holes follow the contour of the oval, and also come out even with the size of the board (which is also not written in stone, so I have some leeway there). Any good ideas for this project?
Thanks in advance for any help!
harley cribbage.jpg