Matches the Stickley "Highlands" and is done in cherry. Sealed with a 1:7 Elmers to water anti-blotch, then dyed red-brown, and wiped with one coat of GF SealACell and seven coats of ArmRSeal satin. Chairs by Stickley.
My Sketchup model of it is up on the 3D Warehouse, if you care to inspect details.
All joinery done using my new (used) Domino and sanding done with my new (used) RO125 sander. Two leaves extend the 44x78 top to 114, and they store in the space under the top when closed.