What are the highs and lows of this system? Can I still get parts and replacement tubes? I plan on going with a Rabbit system down the road but came across this and might pick up for the price.
What are the highs and lows of this system? Can I still get parts and replacement tubes? I plan on going with a Rabbit system down the road but came across this and might pick up for the price.
Plenty of threads on here about FSL... I wouldn't touch one with a 10' pole. Go with Rabbit (Ray Scott) and you won't be sorry.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
Jon,
Yes, you can still get parts for this machine. However Full Spectrum now makes the 5th generation machine. If you don't mind can you tell me the price, if not you can PM me and I can give you a lot more information.
Note: From what I understand, FSL will want to charge you a $300.00 transfer fee to retain ownership of the software. You will need this if you want any support or upgrades.. If you plan on using the machine for a short while then it shouldn't be an issue.
Contrary to what Dan says, there are plenty of very satisfied FSL owners out there... Not to take anything away from Rabbit, as I hear it is a good machine with excellent support..
Last edited by Mike Troncalli; 01-29-2015 at 10:28 AM.
Full Spectrum Laser 5th Gen, 45 Watt with Gold Catalyst tube
Rotary Attachment
Corel Draw X5
Complete wood shop.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
I think I've probably owned lasers from just about every major manufacturer around from cheap Chinese junkers, western made premium stuff (Epilog/Trotch/ULS) up to the high end Japanese made multi kilowatt systems.
I wouldn't go near an FSL system even with somebody else's pole.
Many of the "satisfied" FSL users have never had anything else to compare it to so being a king with one eye in a world of blind people is easy
You did what !
This is just a really good price. I have looked at a 5th gen and wasnt happy with the service. I just cant pass up the short term solution at this price. Just trying to see what issues might be out there and see how available parts are.
Like I said it wasnt what I was looking for and I will end up with a Rabbit later on but this just cant be passed up.
Hi-Tec Designs, LLC -- Owner (and self-proclaimed LED guru )
Trotec 80W Speedy 300 laser w/everything
CAMaster Stinger CNC (25" x 36" x 5")
USCutter 24" LaserPoint Vinyl Cutter
Jet JWBS-18QT-3 18", 3HP bandsaw
Robust Beauty 25"x52" wood lathe w/everything
Jet BD-920W 9"x20" metal lathe
Delta 18-900L 18" drill press
Flame Polisher (ooooh, FIRE!)
Freeware: InkScape, Paint.NET, DoubleCAD XT
Paidware: Wacom Intuos4 (Large), CorelDRAW X5
A solution is the means of a problem being solved, it sounds like you have made your mind up Jon? from experience I can say you are making a bad choice but in reality it is your choice.
You did what !
I suppose you could take that approach to this. My mind was made up for the most part, I just wanted to see about parts and known issues. I am not against searching, but with every system there are "common" things to look for. I have worked with other laser setups in the past but it doesnt hurt to reach out for quick things to look for.
As stated I intend on getting a rabbit system in the second half but funds are low right now to drop that kind of money. We aren't all sitting around with pockets full of money. This isn't being bought as a business but as a small part there of. So if you know where i can get a laser system, the computer, the software, along with some other add-on for less than 2k I am all ears.
I have had a 4th Gen FSL for about 3 years – here is my experience. I am in a school setting not a business trying to make money. In the three years we have engraved about 600 computers 500 pen boxes like the ones I have pictured 50 award plaques (pictured). 400 names on corian pens, lots of matt board models and 1/16” to 1/8” acrylic cut outs in varies shapes. About a year ago I lost power – FSL tech support was helpful they said it was probably the power supply or the tube, they wanted me to send the power supply in to have tested but I replaced both the power supply and the tube. They said I probably didn’t need both but in my situation it worked best for me just to replace both. After installing both the laser would not fire – Tech support had me sent them a picture of the power supply and found a jumper off I forgot to install. I called tech support on two other occasions with software issues and my problems were resolved each time. Once they had me send them my file and they found the problem. We mainly used corel draw and the FSL interface is very easy to use. When I engraved the computers it would have been nice to have a faster laser other than that I have been very happy with the laser. If I had to replace it today I would buy another FSL probably the 5th gen. IMG_0350.jpgIMG_0349.jpg
Awesome, I really appreciate the response. when engraving the computer did you use thermark? If so how well does it turn out?
Not sure how he did it but my experience most computers are AA( anodized Alum) and engrave fine with out anything.
If the Help and advice you received here was of any VALUE to you PLEASE! Become a Contributor
Rabbit RL_XX_6040-60 watt Laser engraving/cutting machine Oh wait its a 3D Printer my bad LOL
Lasercut 5.3
CorelDraw X5
10" Miter Saw with slide
10" Table Saw
8" bench mount 5 speed Drill Press
Dremel, 3x21 Belt Sander
I didnt think about that as I use Mac's.... But it is a very valid point. Kinda feels like a dumb question now.
Hey Jon: The 4th Gen was the first laser I purchased and it will engrave and cut material, such as 1/4" Baltic Birch plywood (slowly). It's a rebadged K40 with FSL's controller card and software, which in my opinion is pretty good and a lot better than the the Chinese software I've used. Parts are pretty widely available, even though Full Spectrum no longer sells this machine. You will probably need to fidget with it to keep it operating at its best, as it does have idiosyncrasies, but that's the tradeoff for an inexpensive laser cutter that is referred to as a hobby machine. Its cutting area is around 9" x 14" and connects with a USB cable.
I also have two Gen 5 lasers (40 W), which began as a Kickstarter project. The laser was designed in-house and is assembled in Las Vegas. I have put a lot of miles on these machines the last 2+ years and feel I have a good handle on their capability. I had to switch out a power supply in one (warranty) and have replaced the tubes once a year. This is a better machine than the Gen 4 (K40) for a variety of reasons including faster engraving speed, more consistent cuts, easier to calibrate/maintain, quicker to focus, and a larger 20" x 12" engraving and cutting envelope. It can be connected with either a USB or Ethernet connection.
Macs engrave just fine.