Hello,
So I mainly haunt the laser engraving threads, but I purchased a little 3040 ebay cnc about 1 year ago. I finally have really started getting into it a bit more, and having a good time.
My question is I've only used really used the basic bits it came with. Or the 10 bits for $12 dollar found on ebay. They are 2 flute. Note sure what direction( down or up). I get good cuts, but really only
go 1/16" down at a time. I've seen similar machines do at least 1/8". My struggles doing that. So the big question.
Now I know these machine don't have a lot of power, but would a more expensive bit be able to cut deeper, or would it just cut cleaner?
Thanks